BKL-SS Bending Beam Loadcell
- Bending beam loadcell
- C3 Class
- Capacity: 10 kg to 500 kg
- Stainless Steel
- IP67 Protection
- Suitable for reactor, low-capacity tank weighing systems, insdustrial scales, test equipment.
Technical Table
Accuracy Class | C3 | |
Output Sensitivy (=FS) | mV/V | 2.0 ± 0.2 |
Maximum Capasity (Emax) | kg | 10,20,30,50,100, 200,250,500 |
Max. Number of Load Cell Intervals | nLC | 3000 |
Ratio of Min. LC Verification Interval | Y= Emax / Vmin | 15000 |
Combined Error | %FS | ≤± 0.023 |
Safe Overload | %FS | 150% |
Ultimate Overload | %FS | 300% |
Zero Balance | %FS | < ± 1 % |
Excitation , Recommended Voltage | V | 5 ~ 12 |
Excitation Maximum (Umax) | V | 18 |
Input Resistance | Ω | 460 ± 50 |
Output Resistance | Ω | 350 ± 3.5 |
Insulation Resistance | MΩ | ≥5000 ( at 50VDC ) |
Compensated Temperature | °C | -10 ~+40 |
Operating Temperature | °C | -35 ~ +65 |
Element Metarial | Stainless Steel | |
Ingress Protection | IP67 | |
Recommended Torque on Fixation | Nm | M8:25 M10:50 |
Cable | mm | 4x0,22 |