BSP-7 Single Point Loadcell
- Single point loadcell
- C3 Class
- Capacity: 50 – 100 – 150 -200 – 300 – 500kg
- Aluminium material
- IP65 Protection
- Max base dimensions: 450mm x 450mm
- Suitable for single-point platforms, test equipment, checkweighers, belt scales.
Technical Table
| Accuracy Class | C3 | |
| Output Sensitivy (=FS) | mV/V | 2.0 ± 0.2 |
| Maximum Capasity (Emax) | kg | 50,100,150,200,300,500 |
| Max. Number of Load Cell Intervals | nLC | 3000 |
| Ratio of Min. LC Verification Interval | Y= Emax / Vmin | 10000 |
| Combined Error | %FS | ≤± 0.0230 |
| Safe Overload | % Emax | 150% |
| Ultimate Overload | % Emax | 200% |
| Zero Balance | %FS | < ± 2 % |
| Excitation , Recommended Voltage | V | 5 ~ 12 |
| Excitation Maximum (Umax) | V | 18 |
| Input Resistance | Ω | 406 ± 6 |
| Output Resistance | Ω | 350 ± 3 |
| Insulation Resistance | MΩ | ≥5000 ( at 50VDC ) |
| Compensated Temperature | °C | -10 ~+40 |
| Operating Temperature | °C | -35 ~ +65 |
| Element Metarial | Aluminium | |
| Ingress Protection | IP65 | |
| Recommended Torque on Fixation | Nm | M8: 25 |
| Cable | mm | 4x0,22 |
